SPECIAL ANNOUNCEMENT
SPECIAL ANNOUNCEMENT
FOR THE OWNERS OF TEC-22 PISTOLS
Its been a long time in coming but finally someone has produced a magazine that really works in the Tec-22!
COMPLETELY DISASSEMBLE TO CLEAN
Anyone who has shot .22 rimfire ammo knows just how dirty that kind of ammo is. Dirt and other crud invade the inside of the magazine. In the past there was no way to clean the magazine.
That’s no longer a problem with the TI-25 magazines. Three stainless steel cap screws make it easy to disassemble the magazine into two separate halves for cleaning. A set screw tool is included with every magazine.
Clean the inside of the magazine with hot soapy water, dry, reassemble and the TI-25 magazine is as clean as new
ON SITE PRECISION ADJUSTED TO FIT YOUR GUN
A magazine should not wiggle in your gun. The TI-25 magazine can be adjusted for (1)FEED ANGLE, (2) FEED HEIGHT and (3) EJECTOR TO BOLT DISTANCE. Four cap screws on the top of the magazine allow the magazine to be adjusted for an exact fit in your gun. A set screw tool is included with every magazine.
The ability to precision adjust the TI-25 magazine to your gun means that you can count on reliable feeding.
CONSTRUCTED OF A HI-TECH COMPOSITE MATERIAL
The TI-25 magazines are 2X times more impact resistance and 3X times more wear resistance than aluminum! The weight to strength characteristics of the composite glass construction make it so strong that its used in the manufacture of airplanes.
The TI-25 magazines are designed to stand up to hard use.
STAINLESS STEEL FEED LIPS AND EJECTOR
The most critical part of any magazine other than its precise adjustment in the gun, are the feed lips. The TI-25 Magazines use REPLACEABLE stainless steel feed lips ensuring that the feed angle remains consistent. The stainless steel feed lips incorporate the stainless steel ejector which can take the pounding and keep kicking out the spent shells. Magazines with plastic feed lips and plastic ejectors cannot provide the strength and durability of stainless steel.
Do these magazines cost more than the others? Yes they do, because they work!
and the others don't! But you already know that don't you...
$49.99 each
TO ORDER CALL WAYNE AT 708-799-6161
INDIVIDUAL PARTS and ACCESSORIES
FOR ALL TEC-22 MODELS
| T2-001 | Magazine Catch - NEW ITEM |
$24.95 |
|
| T2-002 | Magazine Catch Axis |
$5.95 |
|
| T2-003 | Magazine Catch Spring |
$9.95 |
|
| T2-004 | Main Spring (Hammer/Trigger) Heavy Duty |
$19.95 |
|
| T2-005 | Hammer - 4130 Hi Carbon Cold Rolled Steel Blued |
$19.95 |
|
| T2-006 | Hammer Axis |
$5.95 |
|
| T2-007 | Hammer Bushing Stainless Steel (2) |
$9.95 |
|
| T2-008 | Receiver Cover Axis |
$11.95 |
|
| T2-009 | Cover Axis Screw |
$7.95 |
|
| T2-010 | Firing Pin - 4140 Hi Carbon, Cold Rolled Steel, Blued |
$24.95 |
|
| T2-011 | Firing Pin Spring -Stainless Steel |
$4.95 |
|
| T2-012 | Extractor |
$19.95 |
|
| T2-013 | Extractor Spring-Stainless Steel |
$8.95 |
|
| T2-014 | Extractor Pin |
$9.95 |
|
| T2-015 | Recoil Spring-Stainless Steel |
$9.95 |
|
| T2-016 | Trigger - 4140 Hi Carbon Cold Rolled Steel, Blued |
$24.95 |
|
| T2-017 | Magazine 25 Round Stainless Steel Feed lips See Special Announcement Above For Details |
$49.95 |
|
| T2-018 | CAD Drawings - Hammer, Trigger, Firing Pin, Insert Tray and Magazine Catch Bar |
$19.95 |
|
| T2-019 | E-Ring |
$2.95 |
|
| T2-020 | Muzzle Extension for Threaded Barrel |
$39.95 |
|
| T2-021 |
Basic Repair Kit
Click
Here for Photo Savings of $17.30 |
$49.95 |
|
| T2-022 |
Complete Rebuild
Kit
Click
Here for Photo Savings of $41.95 |
$129.95 |
|
| T2-023 | Owners Manual |
$7.50 |
|
| T2-024 |
Hard Side Carry Case - 14 inch w/Intratec Logo |
$24.95 |
|
| T2-025 |
Hard Side Carry Case - 17 inch w/Intratec Logo |
$29.95 |
|
|
T2-026 |
T-Shirt w/ Intratec Logo - Large Only Black Only |
$24.95 |
|
Questions? Call Wayne 708-799-6161
